HK Series 2.0-2.5t Electric Forklift With Lithium Power-HK20/25

Classification:

Industrial Vehicles

Products

Lithium Forklift

Key words:

HK Series 2.0-2.5t Electric Forklift With Lithium Power-HK20/25

Phone:

E-mail:

Product Detail
Parameter

- Commodity name: HK Series 2.0-2.5t Electric Forklift With Lithium Power-HK20/25
- Industrial Vehicle: Lithium Forklift
1.Intelligent Start System:Uses a two-level start system with electric lock and card swipe to prevent unauthorized operation and ensure safety, complying with national TSG81 safety regulations.

2.Motor direct drive：The walking motor directly converts electrical energy into mechanical energy, driving the gearbox to move, resulting in less energy loss, fast starting speed, and an increase in energy utilization rate of over 30%, making driving efficient and reliable.

3.Seat power-off+OPS protection：The seat is equipped with a sensing function, which automatically cuts off the power when leaving the seat, cutting off the mast's lowering and walking functions, making driving and riding safer.

4.New Body Design:The power battery is placed under the chassis, lowering the center of gravity, enhancing stability, and ensuring safer driving.

5.Maintenance-free steering bridge:Casting integral steering bridge, spindle bearing using tapered bearing design for better impact resistance and long service life.
Body contact parts are installed with buffer blocks to improve comfort and reduce fatigue.

6.Load sensing hydraulic system：The full hydraulic load sensing system is adopted to give priority to steering, so that the steering response speed is faster. The hydraulic pipeline is easy to operate. The 24 ° cone+O-ring double seal is adopted for the hydraulic pipeline, which makes the seal more reliable.

7.Power battery system：A Mature Iron(III) phosphate lithium battery cell module is adopted, with charging and discharging efficiency of more than 90%, 1.5-2 hours fast charging, charging on demand, high efficiency, and reliability;5 years or 10000 hours of the extended warranty, with a capacity retention rate greater than 80%; Equipped with leakage protection function, millisecond-level response, safer to use.

8.Intelligent Controller + LCD Display:Monitor the power battery, motor, electrical parts, etc. through the CAN bus. In case of leakage, short circuit, under-voltage and other faults, limit the relevant actions of the vehicle to ensure the safety of people and vehicles.

9. Advanced Ergonomics: The operation space is increased by 20% compared to traditional forklifts. Low-torque steering gear and small diameter adjustable steering wheel make steering easier.

10.New reinforced wide view mast：The mast is widened in design, increasing the driving field of vision by 20%. Shangang customizes special-shaped steel, making the structure more sturdy, with high load-bearing strength, and safe and reliable operation.

11.Side roller wheel：The side roller is above the main roller. When the shelf is raised to a higher position, the left-right shaking amplitude is greatly reduced, which improves the stability of high position operation and reduces the bearing failure rate.

12.Efficient Gearbox: Features a 38:1 high-speed ratio gearbox with direct motor drive, minimizing energy loss, enhancing output power, increasing travel speed and climbing ability, and improving operating efficiency.

13.Rain experiment：The electrical parts of the whole vehicle are of well-known brands in the industry, with multi-layer protection design, and the protection level reaches IP54, meeting the requirements of rainy days.

14.Wide-Opening Stamped Hood:The hood is made from a single mold with a sturdy structure, good sealing, and long lifespan. It opens wide for easy access to the battery, oil pump motor, electrical components, and hydraulic tank for maintenance.

Manufacturer		ENSIGN
Model		CPD-HK20	CPD-HK25
Rated load lifting capacity	Q(kg）	2000	2500
Rated load center distance	c（mm）	500	500
Overweight(with battery)	kg	3200	3500
Tire type		Pneumatic tire	Pneumatic tire
Front tire specifications		7.00-12-12PR	7.00-12-12PR
Rear tire specifications		6.00-9-10PR	6.00-9-10PR
Max. lift height	H4(mm)	3000	3000
Overall height(overhead guard)	H6（mm）	2125	2125
Length (to the vertical plane of the fork)	l2（mm）	2535	2535
Width	b1（mm）	1170	1170
Fork size(LWH）	l/s/e（mm）	1220×122×45	1220×122×45
Max. travelling speed (full load/no load)	km/h	14/15	14/15
Max. lift speed (full load/no load)	mm/s	330/400	300/400
Rated power of traction motor, S2 60min working system	kw	8	8
Standard battery voltage/capacity	V/AH	80/202	80/202